Platform / Stake Truck Bodies

Click here to download a copy of the datasheet in PDF format.

Standard Equipment

• Lengths from 8'.
• Width 96" - 102" nominal O.D.
• Longsills 6" structural channel, gusseted.
• Cross-members 3" structural channel, 12" on center.
• Rub-rail Structural angle 5" x 3- 1/2" x 1/4" each side and rear, Installed flush with floor.
• Stake Pockets, uniform pre-punched industry standard for racks each SIDE and REAR.
• Floors, 1-3/8" Laminated Hardwood plank with one coat of boiled linseed oil.
• Lights, Clearance lights to CMVSS 108 mounted at 45 degrees in a protective steel fabricated bracket c/w reflectors.
• Paint, All units sandblasted and prepared before application of Sherwin-Williams GENESIS^TM acrylic urethane paint.
• Unit thoroughly undercoated.
• Installation on chassis included.
• Mud Flaps, One pair of heavy duty "Durabody" flaps.

Typical Options

• Special lengths available.
• Width from 90" and 102" Nominal OD Available.
• Longsills of varied heights and strengths available for specific applications.
• Extended crane support sill structures.
• Cross-members 4" "I" Beam available for extra heavy duty requirements.
• Rub-rail Reversed on customer preferred side to provide winch track clearance over wheels and full deck length winch utilization.
• Exterior pockets with 3/8" x 2" rub/tie rail and space bars.
• Floors, 1/4" smooth or checker-plate steel, various thickness smooth and checkerplate steel overlays available.
• Headboards of Fabricated 12 Ga Solid steel.
• Combination screen and solid steel as required.
• Multi purpose boom support structures as required.
• Panel boxes for specialty plywood products.
• Bumpers 3" and 5" heavy duty "U" shaped integrally connected to truck frame.
• Screen mesh windows, ladders, tarp structures and tarps.
• Rack "Kits" using drop in plywood panels and bows structures with fitted tarpaulins.
• Stake racks with top and bottom cap protection channel over 3/4" Crezon-faced plywood.
• Tie down chains, rings and rails, pipe sockets.
• Underbody toolboxes with positive recessed lock and key.
• Lumber rollers.
• Hoists, front mount and underbody.
• Pintle hooks up to 80,000 lbs Gross towed trailer weight.
• Back-up alarms.
• Mid turn signals.
• Additional Chassis/Frame modifications optionally available.