FRP Truck Bodies

Click here to download a copy of the datasheet in PDF format.

Standard Equipment

• WALLS 3/4" white FRP Corrosion resistant lower rail connection design.
• Stainless Rub-rail I fasteners. Mylar separator electrolysis barrier tape on bottom rail connections.
• 6061-T-6 aluminum alloy extrusions.
• REAR DOOR opening with R96DF Rollup door.
• REAR FRAME 11 ga. GALVANNEAL boxed HSLA steel. Welded shockplates.
• GRAB HANDLES, 2 aluminum on rear door frame.
• Flush sill entrance. Built in drain trough.
• INTERIOR WIDTH =100" wall-to-wall. No interior fasteners at the floor line to snag pallets.
• SCUFF PLATE 1/8 " thick RMS 12" high.
• CRASH ANGLE formed 16" x 3" bolted to floor and front bolster.
• ROOF One piece .032" stretched, urethane bonded to pre-arched "I"-Beam aluminum bows 24" c/c, rivets 2" c/c.
• AERO-DYNAMIC fuel saving 10" radius top front, 5" radius front corner posts.
• Sills 5" structural channel gusseted every second cross member.
• Cross members 4" pre-waxed, black undercoated I-Beams with #80,000 yield material 12" o/c welded to "J" rail.
• FLOOR 1-3/8" pre-undercoated laminated hardwood with 2 screws per board per cross-member floorboards coated with boiled linseed oil.
• Black rubber flaps (PR).
• HUCK (Vinyl encapsulated white head) bolts used through corners and FRP connections.
• INTERIOR DOME LIGHTS, surface mounted and comes with a cab switch.
• CLEARANCE LIGHTS Grote plug-in light system to CMVSS 108 standard.
• Silicone rich heat shrink tube, di-electric grease.
• AFTERFRAME as required.
• Black undercoat on under-structure.
• 1 year DURABODY warranty included.

Typical Options

• Transparent roofs. STAINLESS corner posts, door frames, bumpers.
• Load "cargo" track. Scuff liners of corrugated steel, bonded FRP or laminated hardwood boards. Various heights.
• Steel and aluminum floors. Insulation packages, plywood and KEMLIGHT liners.
  Refrigeration openings..
• DOORS, 7/8" FRP. 3 aluminum hinges, picture frame aluminum extrusions.
  Neoprene hollow compression seals..
• Side door, full height 2 hinges, galvanneal thin profile frame, 42" x 80" with step.
  Continuous bar-lock.
• Roll-up doors. Dry freight or insulated, stainless door rivets. 3 and 4 piece bi-fold doors, extra locks.
• Tuk-under and "rail" gate loaders. Eyelevel post mounted tail-light brackets.
• Under-ride bumpers and various protective features.
• THRESHOLD PLATE 24" x 96" of 12 ga. steel routed flush.
• BUMPER Heavy Duty "U" shaped 5" structural channel HARDWOOD FILLED.
• Insulation packages. KEMLIGHT .090" thick interior fiberglass USDA approved lining.
• Crash plates, 16"-24" Threshold treadplates of 12"-48".
• Extra Cross members in rear entrance or high load areas.
• Rubber dock bumpers, steps. grab handles, ventilators, heaters, coolers. belly boxes, Nosecones. Placards and "CONSPICUITY" tape.
• Premium paint packages, striping, decals.