Aluminum Truck Bodies

Click here to download a copy of the datasheet in PDF format.

Standard Equipment

• BODY PANELS 0.040" pre-painted white aluminum riveted 3" c/c to 1-1/2" "Z" posts on 24" centres.
• Lower rail fasteners stainless with Mylar electrolysis barrier tape on lower rail connections.
• Extrusions 6061-T-6 aluminum alloy.
• Corners are AERODYNAMIC 5" sides and 9" top radius; cast aluminum to provide fuel savings.
• REAR DOOR opening with R96DF Rollup door
• REAR FRAME 11 ga. GALVANNEAL boxed HSLA steel with gusseted corners.
• Shock transfer plates in rear sill where impact is constant.
• GRAB HANDLES, 2 aluminum on rear door frame.
• Entrance flush sill with built in 3/4" drain trough.
• SCUFF PLATE 12" high corrugated each sidewall.
• CRASH ANGLE formed 16" x 3"; bolted to floor and front bolster for extra strength.
• 4 FRONT ATTACH PLATES welded to sub frame on the first member to retain the lower bulkhead.
• SIDE WALLS with 3/8" plywood liner screwed on.
• FRONT WALL with 1/2" plywood liner screwed on.
• ROOF One piece 0.032" stretched, urethane bonded to pre-arched "I"-Beam aluminum; bows 24" c/c and rivets 2" c/c.
• Sills 5" structural channel gusseted every second cross member.
• Cross-members 4" pre-waxed, black undercoated I-Beams with #80,000 yield material 12" o/c.
• FLOOR 1-3/8" pre-undercoated laminated hardwood with 2 screws per board per cross-member floorboards coated with boiled linseed oil.
• Spray suppressant, black rubber flaps (PR).
• INTERIOR DOME LIGHTS, surface mount comes with cab switch.
• CLEARANCE LIGHTS Grote plug-in light system to CMVSS 108 standard.
• Silicone rich heat shrink tube, di-electric grease.
• AFTERFRAME as required.
• Black undercoat on under-structure.
• 1 year DURABODY warranty included.

Typical Options

• Aluminum or FRP swing or Roll-up doors, (dry freight or insulated), stainless door rivets, 3 and 4 piece doors.
• Hollow side doors 39" standard wide, other widths available. Rear doors aluminum or FRP.
• Tie bars, "D" rings, Cargo tracks and various load-restraining devices.
• Plywood interior wall liners 1/4" to 3/4" fastened with screws.
• Insulation packages to suit various product temperatures.
• Steel or aluminum diamond-plate, Inverted "T" anti-skid floors.
• FRP white USDA approved for food handling interior wall liners. 100% caulked.
• Scuff liner options, corrugated and smooth steel, Composite or laminated boards.
• 12" side 1-1/2' "Z" post centres. SQUARE front.
• Doghouse attics, ("Mattress box") up to 4' in front over cab.
• FRP Translucent roof skin to replace aluminum for brighter interior effect.
• Crash plates, 16" - 24", Threshold plates 12" - 48".
• Extra Cross members in rear entrance or high load areas.
• Tuk-Under or "Rail- gate" loaders, Walk ramps Eye-level post mounted tail-light brackets.
• "U"-Bumpers, "Dock walloper" configurations and protective features.
• STAINLESS corners, and rear door frames.
• THRESHOLD PLATE 24" x 96" of 12 ga. steel routed flush.
• Rubber dock bumpers, sidesteps, ventilators, heaters, refrigeration units, nosecone, etc.
• Premium paint packages, striping.
• Placards, Reflective "CONSPICUITY" tape.