Drop-frame FRP Dry Van Trailers

Click here to download a copy of the datasheet in PDF format.

Standard Equipment

• 13-1/2" neck drop on main floor at 9' behind kingpin. Other drop dimensions available.
• 7/8" FRP white gel-coat walls. Stainless sealed lower rail fasteners.
• DOORS, 7/8" FRP. Picture frame aluminum extrusions. Neoprene hollow compression seals.
• 4 aluminum x 4" wide HD hinges. Galvanized HD lock rods. Spring door hold-backs.
• Rear door frame features flush rear sill entrance. H.S.S. x 50,000 yield sill. Self draining header.
• Corner posts extend 8' below side rail protecting tail-lights from breakage.
• 100" wide wall-to-wall. No interior fasteners at floor to catch pallets inside.
• ROOF: One piece stretched, urethane bonded to pre-arched "1" beam aluminum bows 24" c/c. riveted on 2" c/c.
• Bumper, Under-ride 96"x 4" x 4" H.S.S. steel tube.
• AERO-DYNAMIC fuel saving 10" aluminum radius cap front 5" radius posts.
• 5/16"- 50,000 minimum yield entire bottom plate and coupler channels. 8 channel ramp sections.
• 4" pre-wax undercoated 80,000 H.S.L.A. at 3.2 lb/ft. I-beams 12" c/c welds to inner steel 'J' rail.
• 1-3/8" pre-undercoated laminated hardwood. 2 x 5/16" screws/board.
• HUCK (Vinyl encapsulated white head) bolts used through corners , extrusions and FRP connections.
• Holland MK-V landing gear 6 cross member mount. Channel 'K' brace. HD lateral gusseting.
• Lighting meets C.M.V.S.S. standard. Silicone rich heat shrink tube, di-electric grease.
• 22,500 Ib. axles. 10 bolt outboard mount hub piloted drums. Stemco seals.
• FIXED 49" spread spring suspension. Rear axle @ 60" forward ahead of rear (STD.).
• White 10 hole disc wheels. 255/70R x 22.5" Low Profile tires.
• Automatic slack adjusters. ASA's).
• Sherwin-Williams GENESIS^TM acrylic urethane paint on sand blasted metal.
• Black undercoating applied to under-structure, suspension and bogie.
• Air system meets existing regulations. Glad hands offset roadside on aluminum bracket.
• 1 year DURABODY warranty included.
• Conspicuity (Red and White reflective) tape to comply with current laws.

Typical Options

• Heights to 120" interior.
• Air rides, spring suspensions. Wide spreads. Full I-Beam sub-frames, extended slider angles, etc.
• Premium tires, brands and sizes. 5 and 6 spoke, and aluminum disc wheels.
• Tire carriers, Hubmeters.
• Wedges. Pen "roll" top vans. Transparent roofs.
• Scuff liner options, steel, FRP or laminated boards to various heights.
• Steel or aluminum floors. Insulation packages, plywood or FRP liners. Refrigeration openings.
• Roll-up doors, (dry freight or insulated) with stainless door rivets. 3 and 4 piece bi-fold doors, extra locks.
• Tuk-under and "rail" gate loaders.
• STAINLESS corners, door frames, bumpers, light brackets, nosecone, etc.
• Threshold plates, rubber dock bumpers, steps, ventilators, heaters, coolers, belly boxes.
• Special paint packages, striping, Gelcoat colour impregnating, Placards.